Home  About Us  Contact Us  Join Us
 
Information | Articles | Images | Questions | Discussion | Categories  
 
SHOW HOW MUCH YOU KNOW ! Dedicate a Page to your Favorite Topic
 Home >>Potassium dichromate
 > Potassium dichromate
 View All | Upload more images (0  Images)

 Page Start By:Administrator Last edited on February 6th 2008
 Date: February 6th 2008   2 Page Views
0 Peer Articles   0 Comments
0 Questions   0 Discussions
 Font  + -  
Rating :     Email  |  Print  |  PDF

Potassium dichromate
Potassium dichromate
IUPAC name Potassium dichromate(VI)
Other names Potassium bichromate
Identifiers
CAS number
EINECS number 231-906-6
RTECS number HX7680000
SMILES
InChI
Properties
Molecular formula K2Cr2O7
Molar mass 294.19 g/mol
Appearance Red-orange crystalline solid
Density 2.676 g/cm3, solid
Melting point

398°C

Boiling point

500°C decomp.

Solubility in water 4.9 g/100 ml (0°C)
Structure
Crystal structure Triclinic (α-form,<241.6 °C
Coordination
geometry
Tetrahedral (for Cr)
Thermochemistry
Std enthalpy of
formation
ΔfHo298
-2033 kJ/mol
Standard molar
entropy
So298
291,2 J.K−1.mol−1
Hazards
Main hazards Highly toxic
Carc. Cat. 1
Muta. Cat. 2
Repr. Cat. 2
Oxidant
Dangerous for
the environment
R-phrases R45, R46, R60, R61,
R8, R21, R25, R26, R34,
R42/43, R48/23, R50/53
S-phrases S53, S45, S60, S61
Flash point Non-flammable
Related compounds
Other anions Potassium chromate
Potassium molybdate
Potassium tungstate
Other cations Ammonium dichromate
Sodium dichromate
Related compounds Potassium permanganate
Except where noted otherwise, data are given for
materials in their standard state
(at 25 °C, 100 kPa)

Infobox disclaimer and references

Potassium dichromate, K2Cr2O7, is a common inorganic chemical reagent, most commonly used as an oxidising agent in various laboratory and industrial applications. As with all hexavalent chromium compounds, it is potentially harmful to health and must be handled and disposed of appropriately. It is a crystalline ionic solid with a vivid red-orange colour.

Contents

Chemistry

Potassium dichromate is an oxidizer. The oxidation half-equation can be seen:

Cr2O72−(aq) + 14H+ + 6e → 2Cr3+(aq) + 7H2O +1.36 V

In organic chemistry, potassium dichromate is a milder oxidizer compared with potassium permanganate. It is used to oxidise alcohols. It converts primary alcohols into aldehydes, or into carboxylic acids if heated under reflux. In contrast, with permanganate, carboxylic acids are the sole products. Secondary alcohols are converted into ketones — no further oxidation possible. For example, menthone may be prepared by oxidation of menthol with acidified dichromate.

Tertiary alcohols are not able to be oxidized to give a carbonyl group.

In an aqueous solution the colour change exhibited can be used to test whether an aldehyde or ketone is present. When an aldehyde is present the chromium ions will be reduced from the +6 to the +3 oxidation state, changing colour from orange to green. This is because the aldehyde can be further oxidised to the corresponding carboxylic acid. A ketone will show no such change because it cannot be oxidised further, and so the solution will remain orange.

Uses

Like other chromium(VI) compounds (chromium trioxide, sodium dichromate), potassium dichromate may be used to prepare "chromic acid", which can be used for cleaning glassware and etching materials.

Photography

Potassium dichromate has important uses in photography and in photographic screen printing, where it is used as an oxidizing agent together with a strong mineral acid.

Gum bichromate Printing was one of the very first stable photographic printing processes, dating back to about 1850. A solution of Gum Arabic and potassium dichromate, once applied to paper and dried, will harden when exposed to ultraviolet light.

Chromium intensification uses potassium dichromate together with equal parts of concentrated hydrochloric acid diluted down to approximately 10% v/v to treat weak and thin negatives of black and white photograph roll. This solution reconverts the elemental silver particles in the film to silver chloride. After thorough washing and exposure to actinic light, the film can be redeveloped to its end-point yielding a stronger negative which is able to produce a more satisfactory print.

A potassium dichromate solution in sulfuric acid can be used to produce a reversal negative (i.e,. a positive transparency from a negative film). This is effected by developing a black and white film but allowing the development to proceed more or less to the end point. The development is then stopped by copious washing and the film then treated in the acid dichromate solution. This converts the silver metal to silver sulfate, a compound that is insensitive to light. After thorough washing and exposure to actinic light, the film is developed again allowing the previously unexposed silver halide to be reduced to silver metal.

The results obtained can be unpredictable, but sometimes excellent results are obtained producing images that would otherwise be unobtainable. This process can be coupled with solarisation so that the end product resembles a negative and is suitable for printing in the normal way.

CrVI compounds have the property of tanning animal proteins when exposed to strong light. This quality is used in photographic screen printing. In screen printing a fine screen of bolting silk of similar material that is required to be printed is then taped securely onto the surface of the screen and the whole thing exposed to strong light for a period - typically about half an hour in bright sunlight. When the design is removed, the gelatine on the screen is washed off with hot water. All the gelatine exposed to sun-light will have been hardened by the dichromate and will be retained on the screen leaving a precise mask of the required design which can be printed in the usual way.

Ethanol determination

The concentration of ethanol in a sample can be determined by back titration with acidified potassium dichromate. Adding reacting the sample with an excess of potassium dichromate, all ethanol is oxidized to acetic acid:

The excess dichromate is determined by titration against sodium thiosulfate. Subtracting the amount of excess dichromate from the initial amount, gives the amount of ethanol present. Accuracy can be improved by calibrating the dichromate solution against a blank.

Wood treatment

Potassium dichromate is used to finish certain types of wood. It brings out the color and grain to a very deep, rich appearance. This is particularly effective on mahogany.

Safety

Potassium dichromate is one of the most common culprits in causing chromium dermatitis. Chromium is highly likely to induce sensitization leading to dermatitis, especially of the hand and fore-arms, which is chronic and difficult to treat. It is also toxic, with an doses of approximately 100 mg/kg being fatal in rabbits and rodents.

As with other CrVI compounds, potassium dichromate is carcinogenic and should be handled with gloves and appropriate health and safety protection. The compound is also corrosive and exposure may produce severe eye damage or blindness.

References

  1. ^ L. T. Sandborn. "l-Menthone". Org. Synth.; Coll. Vol. 1: 340. 
  2. ^ Woodworking: Contemporary Headboard. DIY Network. Retrieved on 2008-01-28.
  3. ^ Safety data for potassium dichromate HSci project
  4. ^ Potassium dichromate MSDS. ScienceLab.com. Retrieved on 2008-01-28.

    Sources
Subscribe to this blog's feed
  Peer Articles   Comments
 
Opps ! No article published for this information.
Click Here to post new article



 
 
Opps ! No comments posted for this information.
Click Here to post your comment



 
  Questions   Discussions
 
Opps ! No Questions posted for this information.
Click Here to post new Questions



 
 
Opps ! No topic posted for this information.
Click Here to post the topic



 
  Post a Comment
Sign in

 
 
Home   |  About Us   |  Sign Up   |  My Account   |  Advertise With Us   |  Contact Us   |  Terms Of Services   |  
© Copyright 2008 jigfo.com, All Rights Reserved.